Attwood Tsunami T1200 Mk2 Bilge Pump 12vAttwood's Tsunami Mk2 Bilge Pump is the only manual bilge pump that eliminates air locks thanks to a patented X-air impeller that ejects trapped air in the pump and pipework, preventing the pump from running dry and burning out. Tsunami Mk2 is one of the easiest manual bilge pumps to install and service, owing to its external mounting feet that reduces time and effort. So what is Air-Lock? Air-Lock (also known as vapor lock) is a restriction of, or complete stoppage of liquid flow cause dby vapor trapped in a high point of a liquid-filled pipe system. Key Features: - Exterior mounting feet eliminate the need to remove the basket.
- Industry leading motor and shaft seals provide better protection against harmful corrosion that, in another instance, could cause failure.
- No pipe or hose removal is required, reducing the time that it takes to replace the cartridge.
- Patented X-Air Impeller that prevents air locking so that the pump will not run dry and burn out.
- Single hand pump cartridge release is convenient when trying to access a pump located in a hard to reach area of the boats hull.
- Tricuspid check valve helps prevent the water from backflowing through the pump.
Output | 500GPH | 800GPH | 1200GPH | Dimensions | 97 x 91mm | 114 x 101mm | 115 x 101mm | Hose Diameter | 3/4" & 1" | 1" & 1-1/8" | Fuse Size | 3 Amp | 4 Amp | 5 Amp | Minimum Water Level | 10mm | IP Rating | IP68 | Certifications, Standards & Listings | Bilge Pump Standards: ABYC H-22, ISO 8849, ISO 15083 Ignition Protection Standards: ISO 8846 Marine Marine Electrical Wiring Standards: ABYC E-11, ISO 10133 Approvals: NMMA “As approved Listing”; CE; RCM; UKCA |
|