CZone Signal Interface (SI) with Seals & Connector

CZone Signal Interface (SI) with Seals & Connector

The Signal Interface (SI) connects the CZone system to your external sensors, alarms and switching devices. The SI allows intelligent, automated operation of circuits depending on the state of the input.

•     Accepts inputs from traditional switch types being used to control outputs
•     Accepts inputs from switches to trigger alarm i.e. high water float switch
•     Accepts inputs from industry standard tank senders (0-5V, 10-180 Ohm, 240-33 Ohm)
•     Accepts inputs from general voltaic or resistive signals can be used for controlling outputs or to display a physical position i.e. show a hatch is partially open
•     LED status indicators for each input
•     Dimensions, WxHxD: 6-3/32"x3-29/32"x1-5/8" 156x100x42 mm
•     IPX5 water ingress protection
•     Resistive input range 0-1000 Ohms
•     Outputs standard NMEA2000 sentences

SI Features:

• 6 inputs
• Inputs from traditional switch types being used to control outputs (Negative, Open circuit, 0-35V DC)
• Inputs from switches to trigger alarm i.e. high water fl oat switch (Negative, Open circuit, 0-35V DC)
• LED status indicators for each input
• Tank level senders (compatible with industry standard sender outputs, 0-5V, 10-180 Ohm, 240-33Ohm)
• General voltaic or resistive signals can be used for controlling outputs or to display a physical position ie show a hatch is partially open
• Inputs
• Network, NMEA 2000
• Dimensions: H 100mm (3”29/32) x W156mm (6”3/32) x D 42mm (1”5/8)
• Weight: 281g
• EMC ratings:
• IEC EN 60945
• IEC EN 61000
• FCC Class B
• ISO 7637 - 1 (12V Passenger cars and light commercial vehicles with nominal 12 V supply voltage - Electrical transient conduction along supply lines only)
• ISO 7637 - 2 (24V Commercial vehicles with nominal 24 V supply voltage - Electrical transient conduction along supply lines only)
• IEC Standards for indirect lighting strikes