Jabsco 50270-0311 Clutched Bilge Pump - Bronze - Single B Pulley - 2in Flanged Ports - 24VThe Jabsco 24V foot mounted clutched pump is suitable for bilge and deckwash applications. The pump features 2" nominal bore flanged ports with 2" BSP counter flanges and measures 270mm long with a 180mm pulley diameter (1B pulley) and 173mm across the ports. The Jabsco clutched pump is capable of pumping 267 litres per minute (59 gallons) at 3 metres total head.
This heavy duty bilge and deckwash pump has a bronze constructed body, stainless steel shaft, mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water applications. The pump can self-prime up to 3 metres of vertical lift and is tolerant to moderate amounts of suspended solids.
Specifications:
- Fuse-2.5A
- Height-148mm (5.8") Excluding Pulley
- Length-264mm (10.4")
- Series-50270 Series
- Size-Pulley Size: Single B Section (16mm)
- Type-Clutch Pumps
- Voltage Description-24V DC
- Width-Excluding Pulley: 152mm (6")
- Brand-Jabsco
- Clutched Pump Pulley Size-Single B Section - 16mm
- Automatic Bilge Pumps-No
- Bearing Type-Heavy Duty
- Maximum Pump Head-Over 4.27 Metres
- Seal Type-Mechanical Seal
- Warranty-1 Year
- Flow Rate 3 Metre Head-16,020 LPH (3523 US GPH) at 1500 RPM
- Maximum Recommended Head-25 Metres (82 Feet)
- Model-50270-0311
- Replacement Impeller-17936-0001
- Self Primes up to-3 Metres (9.8 Feet)
- Inlet Outlet-2" Flanged Ports
| 
