Jabsco 50270-2111 Clutched Bilge Pump - Bronze - Twin A Pulley - 2in BSP Ports - 24VThe Jabsco 24V foot mounted clutched pump is suitable for bilge and deckwash applications. The pump features 2" BSP female threaded ports and measures 270mm long with a 180mm pulley diameter (2A pulley) and 173mm across the ports. The Jabsco clutched pump is capable of pumping 267 litres per minute (59 gallons) at 3 metres total head.
This heavy duty bilge and deckwash pump has a bronze body, stainless steel shaft, mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water applications. The pump can self-prime up to 3 metres of vertical lift and is tolerant to moderate amounts of suspended solids.
Specifications:
- Fuse-2.5A
- Height-132mm (5.2") Excluding Pulley
- Length-264mm (10.4")
- Series-50270 Series
- Size-Pulley Size: Twin A Section (13mm)
- Type-Clutch Pumps
- Voltage-24V DC
- Width-Excluding Pulley: 170mm (6.7")
- Brand-Jabsco
- Clutched Pump Pulley Size-Twin A Section - 13mm
- Automatic Bilge Pumps-No
- Bearing Type-Heavy Duty
- Maximum Pump Head-Over 4.27 Metres
- Seal Type-Mechanical Seal
- Warranty-1 Year
- Flow Rate 3 Metre Head-16,020 LPH (3523 US GPH) at 1500 RPM
- Maximum Recommended Head-25 Metres (82 Feet)
- Model-50270-0211
- Replacement Impeller-17936-0001
- Self Primes up to-3 Metres (9.8 Feet)
- Inlet Outlet-2" BSP Female Thread
| 
