Marinco Pure Sine Wave Inverter 1000W 12v With EU & UK SocketThe Marinco inverters convert a DC voltage to a pure AC sine wave voltage. Specifications: Input voltage: 12VDC (10.5-15.0VDC) Nom Power Tamb=40°C, cosφ 1: 1000w Max. peak load: 2000w Output waveform: True sinewave (THD <3%) Maximum efficiency: 91% Output voltage: 230v AC ±3% Frequency (selectable): 50 Hz ±0.05Hz AC outlet: EU Socket Plus UK Adapter Dimensions: Weight: 4.0 kg / 8.8 lbs Protection degree: IP21 Technology: HF / Switch mode Shut down voltage low battery: 10.2V (±0.5V) Restart voltage low battery: 12.7V (±0.5V)
Shut down voltage high battery: 15.3V (±0.5V) Restart voltage high battery: 14.3V (±0.5V) Maximum allowed ripple on DC: 5% RMS Input current @ nominal load: 92A External DC fuse required: 150A Recommended battery capacity: ≥120Ah DC cable (up to 3m / 10ft): 35mm² - 2AWG No load power consumption: - Off mode: 0mA
- Power Saving Mode: 0.25A
- ON @ Unom: 1.25A
Operating temperature specified (will meet specified tolerances): Full specifications at ambient temperature 0 to 40°C (32 to 104°F), Derating with 5%/°C (3%/°F) at 40 to 60°C (104 to 140°F), Shutdown at over temperature, auto recover after cooling down
Practical operating temperature (may not meet specified tolerances): Ambient temperature -25 to 40°C (-13 to 104°F) Derating with 5%/°C (3%/°F) at 40°C to 60°C (104 to 140°F). Shutdown at over temperature, auto recover after cooling down Cooling:Temperature and load regulated fan Non-operating temperature (storage temperature) : Ambient temperature -30°C to 70°C / -22°F to 158°F Relative humidity: Protected against humidity and condensing air by conformal coating on both sides of all PCB’s. Max 95% relative humidity, non-condensing. Safety: Meet UL458 EN 60950-1 EMC: FCC class A EN55022, EN61000-3-2, EN61000-3-3, EN55024 Protections: Overload, short circuit, over / under voltage, over temperature Reversed polarity: Internal fuse, reversed polarity may lead to permanent damage | 
