Vetus Bow thruster 125kgf 12V D250mm ignition protected

Description Reviews

Vetus Bow thruster 125kgf 12V D250mm ignition protected Installing an electric bow or stern thruster in a petrol (gasoline) engined boat can be very dangerous, due to the possibility of the electric motor igniting fuel vapour. In order to eliminate the risk, this special housing will shield the bow or stern thruster from potentially explosive vapour. The housing enables the thruster to comply with the ISO 8846 Marine “ignition protection” standard. In addition to the standard thruster, the set consists of a watertight (IP65) housing for the electric motor and relays, together with all required seals, electrical connectors and fastening components. An automatic fuse for the control loom is also supplied. This can be reset externally without opening the housing. For both 12 and 24 volt supply. They can also be used as stern thrusters, in combination with the appropriate kit. Because the motor housing is watertight, these sets are also ideal for use where the bow or stern thruster is installed in a wet or humid space. Voltage (V) 12 V Current consumption (A) 800 Continuous operating time (min) 2,5 Main fuse "slow blow" (A) 500 Batteries 12 V, min./max. Ah 1x220 / 2x200 Battery main switch: model BATSW / type BPMAIN 600 / 12 Max. operating time (minutes) 2,5 Motor, reversible D.C. Yes Ignition protection Yes Thrust (N / lbf) 1250 / 275 Power (hp) 8 Internal tunnel diameter (inches) 9 27/32 Weight (lbs) 82 Battery cables, length pos./neg. cables (ft/AWG) Size A in inches, see drawing 9 3/8 Size B in inches, see drawing 20 23/64 Size C in inches, see drawing 4 1/4 Size D min./max. in inches, see drawing 19 11/16 / 39 3/8 Size E in inches, see drawing 11 21/32 Size F, diameter in inches, see drawing 9 29/64 Size G min. in inches, see drawing 9 27/32 Size H, diameter in inches, see drawing 9 27/32 Thrust (N / kgf) 1250 / 125 Power (kW) 5,7 Internal tunnel diameter (mm) 250 Weight (kg) 37 Battery cables, length pos./neg. cables (m/mm²) 0-9/120 / 9-12/150 Size A in mm, see drawing 238 Size B in mm, see drawing 517 Size C in mm, see drawing 108 Size D min./max. in mm, see drawing 500 / 1000 Size E in mm, see drawing 296 Size F, diameter in mm, see drawing 240 Size G min. in mm, see drawing 250 Size H, diameter in mm, see drawing 250 There are currently no reviews for this product. Click here to submit a review