Vetus Bow thruster 55kgf 24V D150mm ignition protected

Description Reviews

Vetus Bow thruster 55kgf 24V D150mm ignition protected Installing an electric bow or stern thruster in a petrol (gasoline) engined boat can be very dangerous, due to the possibility of the electric motor igniting fuel vapour. In order to eliminate the risk, this special housing will shield the bow or stern thruster from potentially explosive vapour. The housing enables the thruster to comply with the ISO 8846 Marine “ignition protection” standard. In addition to the standard thruster, the set consists of a watertight (IP65) housing for the electric motor and relays, together with all required seals, electrical connectors and fastening components.An automatic fuse for the control loom is also supplied. This can be reset externally without opening the housing. For both 12 and 24 volt supply. They can also be used as stern thrusters, in combination with the appropriate kit. Because the motor housing is watertight, these sets are also ideal for use where the bow or stern thruster is installed in a wet or humid space. Voltage (V) 24 V DC Current consumption (A) 200 Continuous operating time (min) 4 Main fuse "slow blow" (A) 125 Batteries 12 V, min./max. Ah 2x55 / 2x70 Battery main switch: model BATSW / type BPMAIN 250 / 24 Max. operating time (minutes) 4 Motor, reversible D.C. Yes Ignition protection Yes Thrust (N / lbf) 550 / 121 Power (hp) 4 Internal tunnel diameter (inches) 5 29/32 Weight (lbs) 44 Battery cables, length pos./neg. cables (ft/AWG) 0 - 75,45 /2 Size A in inches, see drawing 7 43/64 Size B in inches, see drawing 16 7/32 Size C in inches, see drawing 3 7/64 Size D min./max. in inches, see drawing 11 13/16 / 23 5/8 Size E in inches, see drawing 9 27/32 Size F, diameter in inches, see drawing 7 43/64 Size G min. in inches, see drawing 5 29/32 Size H, diameter in inches, see drawing 5 29/32 Thrust (N / kgf) 550 / 55 Power (kW) 3 Internal tunnel diameter (mm) 120 Weight (kg) 20 Battery cables, length pos./neg. cables (m/mm²) 0-23 / 35 Size A in mm, see drawing 195 Size B in mm, see drawing 412 Size C in mm, see drawing 79 Size D min./max. in mm, see drawing 300 / 600 Size E in mm, see drawing 250 Size F, diameter in mm, see drawing 195 Size G min. in mm, see drawing 150 Size H, diameter in mm, see drawing 150 There are currently no reviews for this product. Click here to submit a review